Mathematical Model Calculation of Loading of Wheels Pair of Diesel Locomotive UzTE16M at Wheel-shoe Braking
Article Sidebar
Main Article Content
Abstract
This article examines the calculation of the locomotive's wheelset load during wheel-blade braking. In this case, the bandage, together with the wheel center and the wheel axle, forms rigid joints, the deformations of which are not taken into account. As an example for the methodology, the UzTE16M2 locomotive strap was used, and a curve for the change in the braking force FTORM during the clogging of the wheelset was presented.
Downloads
Article Details
Copyright (c) 2025 Sherzod F, et al.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Asadchenko VR. Automatic brakes of rolling stock: textbook for higher educational institutions of railway transport. Moscow: Marshrut; 2006;392.
Dankovtsev VG. Maintenance and repair of locomotives. In: Chetvergov VA, Kiselev VI, editors. Moscow: GOU “Teaching-Methodical Center for Education in Railway Transport”; 2007;4:14-17.
Ibragimov MA, Kiselev VI, Ramlov VA, Skalin AV. Dynamics of locomotives: textbook. Moscow: RGOTUPS; 2005. 128 p.
Inozemtsev VG, Kazarinov VM, Yasenev VF. Automatic brakes. Moscow: Transport; 1981. 464 p.
Biryukov IV, Savoskin AN, Burchak GP, Serdobintsev EV, L’vov NV, Korotenko ML, Rybnikov EK, Derkach BA. Mekhanicheskaya chast tyagovogo podvizhnogo sostava [Mechanical part of traction rolling stock]. Moscow: Transport Publ.; 1992.
Glushchenko AD, Faizibaev SS, Khromov SA. Model and numeric investigation of impulse contact fields of interface layers. WIT Transactions on Modelling and Simulation. 2001;27. Available from: https://www.witpress.com/elibrary/wit-transactions-on-modelling-and-simulation/27/3153
Kasimov OT, Mamaev ShI, Grishenko AV. Causes of rolling stock brake equipment failures. Technical Science and Innovation. 2021;2:Article 9. Available from: https://btstu.researchcommons.org/journal/vol2021/iss2/9/
Fayzibayev ShS, Khromova GA. Optimization of wheel and rail operation by reducing contact stresses during the dynamic interaction of rolling stock wheelsets. Tashkent: Fan va texnologiya; 2015. 180 p. ISBN: 978-9943-975-96-5.
Fayzibayev ShS, Kasimov OT. Modeling the shift of the surface layer of the locomotive's wheelset bandage in the contact zones with the cast iron brake pads. Universum Tech Sci. 2020;(6):6.
Calculation for evaluating temperature fields in the bandage material during braking of the UZTE16M diesel locomotive. Universum Tech Sci. 2022;(4):5.
Khamidov OR, Kamalov IS, Kasimov OT. Heat calculation of pads during locomotive braking. AIP Conf Proc. 2023;2612(1):060019. Available from: https://pubs.aip.org/aip/acp/article-abstract/2612/1/060019/2880605/Heat-calculation-of-pads-during-locomotive-braking?redirectedFrom=fulltext
Khamidov OR, Kamalov IS, Kasimov OT. Diagnosis of traction electric motors of modern rolling stock using artificial intelligence. AIP Conf Proc. 2023;2612(1):060018. Available from: https://pubs.aip.org/aip/acp/article-abstract/2612/1/060018/2880597/Diagnosis-of-traction-electric-motors-of-modern?redirectedFrom=fulltext
Mamayev S, Fayzibayev S, Djanikulov A, Kasimov O. Method of selection of mainline locomotives in the unloaded state according to the speed characteristics affecting the electromechanical vibrations of the WMB. AIP Conf Proc. 2022;2432(1):030105.
Kasimov O, Fayzibayev S, Djanikulov A, Mamayev S. Numerical studies for estimation of temperature fields in bandage material during locomotive braking. AIP Conf Proc. 2022;2432(1):030025. Available from: https://ui.adsabs.harvard.edu/abs/2022AIPC.2432c0025K/abstract
Kasimov OT, Djanikulov AT, Mamayev SI. Modeling the bending of the tire surface by pads during braking. AIP Conf Proc. 2021;2402(1):070030. Available from: https://doi.org/10.1063/5.0074483
Djanikulov AT, Mamayev SI, Kasimov OT. Modeling of rotational oscillations in a diesel locomotive wheel-motor block. J Phys Conf Ser. 2021;1889(2):022017. Available from: https://doi.org/10.1088/1742-6596/1889/2/022017